Showing 193–204 of 497 results

Glass Door Merchandiser Freezer

Cleaning Coolers have an inner drainpipe for cleaning liquids evacuation or any recipient break. New control system New digital controller with greater precision in temperature control. Easier to adjust the temperature range we want to achieve. Lighting LED lighting. Structure Laminated galvanized steel and laminated steel painted in grey epoxy front. Standard advertising display. Doors Low emissive triple-glazed door (FV). Refrigeration Digital thermostat Ventilated condensation system. Static evaporation system (FS). Heated door frame to avoid the accumulation of ice (FV).

Glass Door Seal

52.00
Primus washer door gasket.

Glass Door Undercounter Refrigerator

Glass door undercounter refrigerator 600 Series Energy efficiency: Improvement of the energy classification, due to the use of R-290 refrigerant, electronic fans, and optimized circulation of the air for improved temperature uniformity in the interior. New control system: The new user-friendly controller IP65 has greater precision in temperature control. Easier to adjust the temperature range we want to achieve. Certifications: Infrico is audited and certified by an international organization AENOR in ISO 9001: 2015 (Quality); ISO 14001: 2015 (Environment); OSHAS 18001: 2007 (Worker Safety and Health) and by INTERTEK in accordance with UL 471 and NSF 7.    

Glass Door Undercounter Refrigerator

Energy efficiency Improvement of the energy classify cation, due to the use of R-290 refrigerant, electronic fans and optimized circulation of the air for improved temperature uniformity in the interior. New control system The new user-friendly controller IP65 has greater precision in temperature control. Easier to adjust the temperature range we want to achieve. Certifications Infrico is audited and certify ed by an international organization AENOR in ISO 9001: 2015 (Quality); ISO 14001: 2015 (Environment); OSHAS 18001: 2007 (Worker Safety and Health) and by INTERTEK in accordance with UL 471 and NSF 7. Structure Compact structure totally injected. Polyurethane insulation 70 mm thick, injected at high pressure free of CFC’s with density 40 Kg / m3, Zero ODP and Zero GWP. New door design New design of doors with double grip handle. Doors equipped with hinges for automatic return and permanent pressure during closing. The automatic return is free when the opening exceeds 95º. They include four-chamber “clean less” flat door gasket easily removable. Refrigeration system Supplied with 3/8” connection pipes for the evaporator. Forced-air evaporator. Hot gas defrost.

Goliath

A press with a horizontal head and buck, specifically designed for rapid, flawless pressing of trousers. Available in 3 versions:
  • PANTAMASTER - The particular construction of its twin bucks allows to finish both trousers’ legs at the same time, setting the front pleats up to 3 cm from the waistline. Its wide bucks make this machine very versatile and suitable also for finishing knitwear or blankets. Trousers are put on the lower buck and held by a special waistband auto-sizing locking device which sets the pleats. Following this, the semi-rigid frame is lowered allowing the second leg to be laid on the buck. The pressure of the head completes the pressing operation.
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Pneumatic-clamping device for waistline locking
    • Electronic board with 10 memorized programs
    • Automatic cycle when closing the upper buck
    • Ready for connection to external steam and air supplies.
  • PANTAMASTER HQ - Same as Pantamaster with the addition of a heated, air-blowing topper for a very accurate quality of finishing.
  • DLP-DOUBLE LEGGER PRESS (new) – universal legger press, equipped with automated ironing cycle and intermediate separation frame for the finishing of the second leg:
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Electronic board
    • Ready for connection to external steam and air supplies.
  Available options:
  • 9 or 20 litters boiler
  • Blowing device for the lower buck
  • Steam iron assembly and safety device.

Goliath

A press with a horizontal head and buck, specifically designed for rapid, flawless pressing of trousers. Available in 3 versions:
  • PANTAMASTER - The particular construction of its twin bucks allows to finish both trousers’ legs at the same time, setting the front pleats up to 3 cm from the waistline. Its wide bucks make this machine very versatile and suitable also for finishing knitwear or blankets. Trousers are put on the lower buck and held by a special waistband auto-sizing locking device which sets the pleats. Following this, the semi-rigid frame is lowered allowing the second leg to be laid on the buck. The pressure of the head completes the pressing operation.
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Pneumatic-clamping device for waistline locking
    • Electronic board with 10 memorized programs
    • Automatic cycle when closing the upper buck
    • Ready for connection to external steam and air supplies.
  • PANTAMASTER HQ - Same as Pantamaster with the addition of a heated, air-blowing topper for a very accurate quality of finishing.
  • DLP-DOUBLE LEGGER PRESS (new) – universal legger press, equipped with automated ironing cycle and intermediate separation frame for the finishing of the second leg:
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Electronic board
    • Ready for connection to external steam and air supplies.
  Available options:
  • 9 or 20 litters boiler
  • Blowing device for the lower buck
  • Steam iron assembly and safety device.

Goliath

A press with a horizontal head and buck, specifically designed for rapid, flawless pressing of trousers. Available in 3 versions:
  • PANTAMASTER - The particular construction of its twin bucks allows to finish both trousers’ legs at the same time, setting the front pleats up to 3 cm from the waistline. Its wide bucks make this machine very versatile and suitable also for finishing knitwear or blankets. Trousers are put on the lower buck and held by a special waistband auto-sizing locking device which sets the pleats. Following this, the semi-rigid frame is lowered allowing the second leg to be laid on the buck. The pressure of the head completes the pressing operation.
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Pneumatic-clamping device for waistline locking
    • Electronic board with 10 memorized programs
    • Automatic cycle when closing the upper buck
    • Ready for connection to external steam and air supplies.
  • PANTAMASTER HQ - Same as Pantamaster with the addition of a heated, air-blowing topper for a very accurate quality of finishing.
  • DLP-DOUBLE LEGGER PRESS (new) – universal legger press, equipped with automated ironing cycle and intermediate separation frame for the finishing of the second leg:
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Electronic board
    • Ready for connection to external steam and air supplies.
  Available options:
  • 9 or 20 litters boiler
  • Blowing device for the lower buck
  • Steam iron assembly and safety device.

Goliath

A press with a horizontal head and buck, specifically designed for rapid, flawless pressing of trousers. Available in 3 versions:
  • PANTAMASTER - The particular construction of its twin bucks allows to finish both trousers’ legs at the same time, setting the front pleats up to 3 cm from the waistline. Its wide bucks make this machine very versatile and suitable also for finishing knitwear or blankets. Trousers are put on the lower buck and held by a special waistband auto-sizing locking device which sets the pleats. Following this, the semi-rigid frame is lowered allowing the second leg to be laid on the buck. The pressure of the head completes the pressing operation.
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Pneumatic-clamping device for waistline locking
    • Electronic board with 10 memorized programs
    • Automatic cycle when closing the upper buck
    • Ready for connection to external steam and air supplies.
  • PANTAMASTER HQ - Same as Pantamaster with the addition of a heated, air-blowing topper for a very accurate quality of finishing.
  • DLP-DOUBLE LEGGER PRESS (new) – universal legger press, equipped with automated ironing cycle and intermediate separation frame for the finishing of the second leg:
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Electronic board
    • Ready for connection to external steam and air supplies.
  Available options:
  • 9 or 20 litters boiler
  • Blowing device for the lower buck
  • Steam iron assembly and safety device.

Goliath

A press with a horizontal head and buck, specifically designed for rapid, flawless pressing of trousers. Available in 3 versions:
  • PANTAMASTER - The particular construction of its twin bucks allows to finish both trousers’ legs at the same time, setting the front pleats up to 3 cm from the waistline. Its wide bucks make this machine very versatile and suitable also for finishing knitwear or blankets. Trousers are put on the lower buck and held by a special waistband auto-sizing locking device which sets the pleats. Following this, the semi-rigid frame is lowered allowing the second leg to be laid on the buck. The pressure of the head completes the pressing operation.
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Pneumatic-clamping device for waistline locking
    • Electronic board with 10 memorized programs
    • Automatic cycle when closing the upper buck
    • Ready for connection to external steam and air supplies.
  • PANTAMASTER HQ - Same as Pantamaster with the addition of a heated, air-blowing topper for a very accurate quality of finishing.
  • DLP-DOUBLE LEGGER PRESS (new) – universal legger press, equipped with automated ironing cycle and intermediate separation frame for the finishing of the second leg:
    • Lower buck with live steam, vacuum and air-blowing upon request
    • Upper buck with live steam
    • Built-in vacuum motor
    • Electronic board
    • Ready for connection to external steam and air supplies.
  Available options:
  • 9 or 20 litters boiler
  • Blowing device for the lower buck
  • Steam iron assembly and safety device.

Gourmet 5T GN2/3 Classic

 

Technical Specifications

Category Information
Seats 1/20
Trays 5T GN 2/3
Outside dimension 620 L x 750 P x 614 H mm
Tray distance 1.5-6.0
Power  5 kw
Weight 45 kg
Max temperature 270° C
Power supply 400 V ~ 3PH + N + PE  400 V ~ 2PH + N + PE  230 V ~ 3PH + PE  230 V ~ 1PH + N + PE  50-60 Hz
   

Healthcare Plus Refrigerator

HEALTH CARE PLUS REFRIGERATOR
  • Blood bank refrigerator, 170 litres of nominal capacity.
  • Digital Plus Controller and LED lightning
  • Stainless steel interior and a solid door.
  • Product temperature simulation probe.
  • Equipped with 3 stainless steel drawers and methacrylate front.
  • Freezing Protection Controller and battery to maintain the alarms and temperature register.
  • Medical Device Class IIa certified by ON 0318 and manufactured in compliance with directive 93/42/EEC.

Healthcare Plus Refrigerator

HEALTH CARE PLUS REFRIGERATOR
  • Blood bank refrigerator, 170 litres of nominal capacity.
  • Digital Plus Controller and LED lightning
  • Stainless steel interior and glass door.
  • Product temperature simulation probe.
  • Equipped with 3 stainless steel drawers and methacrylate front.
  • Freezing Protection Controller and battery to maintain the alarms and temperature register.
  • Medical Device Class IIa certified by ON 0318 and manufactured in compliance with directive 93/42/EEC.