Goliath
A press with a horizontal head and buck, specifically designed for rapid, flawless pressing of trousers.
Available in 3 versions:
- PANTAMASTER - The particular construction of its twin bucks allows to finish both trousers’ legs at the same time, setting the front pleats up to 3 cm from the waistline. Its wide bucks make this machine very versatile and suitable also for finishing knitwear or blankets. Trousers are put on the lower buck and held by a special waistband auto-sizing locking device which sets the pleats. Following this, the semi-rigid frame is lowered allowing the second leg to be laid on the buck. The pressure of the head completes the pressing operation.
- Lower buck with live steam, vacuum and air-blowing upon request
- Upper buck with live steam
- Built-in vacuum motor
- Pneumatic-clamping device for waistline locking
- Electronic board with 10 memorized programs
- Automatic cycle when closing the upper buck
- Ready for connection to external steam and air supplies.
- PANTAMASTER HQÂ - Same as Pantamaster with the addition of a heated, air-blowing topper for a very accurate quality of finishing.
- DLP-DOUBLE LEGGER PRESS (new) – universal legger press, equipped with automated ironing cycle and intermediate separation frame for the finishing of the second leg:
- Lower buck with live steam, vacuum and air-blowing upon request
- Upper buck with live steam
- Built-in vacuum motor
- Electronic board
- Ready for connection to external steam and air supplies.
- 9 or 20 litters boiler
- Blowing device for the lower buck
- Steam iron assembly and safety device.
Inox 16
Electric steam generators with ball-cock water level control. The electric steam generators of the INOX series, with the body of the boiler entirely made of STAINLESS STEEL AISI 304, are produced in accordance with the PED regulations. The steam generator can be fed directly by the water supply network or by a special steel tank.
The INOX series is available with boilers of different sizes and different power:
- INOX 16, boiler volume 16 lts, and stainless-steel electric heating elements of 7-8-10-12-15 Kw
- INOX 24, boiler volume 25 lts, and stainless-steel electric heating elements of 6-7-8-10-12-14-15-16-18-20-22 kW, with a unique group of heating elements or two groups.
- INOX 60, boiler volume 55 lts, and stainless-steel electric heating elements of 20-24-30-36-40-50- 60 kW, with two groups of heating elements.
- INOX 60 COMBIÂ is composed by two overlapping INOX 60 boilers which can be used at the same time
- INOX 180, composed of three overlapping INOX 60 boilers that can be used at the same time
- Stainless steel tank for water feeding and condensate recovery
- all tank components in contact with water made in stainless steel.
Inox 24
Electric steam generators with ball-cock water level control. The electric steam generators of the INOX series, with the body of the boiler entirely made of STAINLESS STEEL AISI 304, are produced in accordance with the PED regulations. The steam generator can be fed directly by the water supply network or by a special steel tank.
The INOX series is available with boilers of different sizes and different power:
- INOX 16, boiler volume 16 lts, and stainless-steel electric heating elements of 7-8-10-12-15 Kw
- INOX 24, boiler volume 25 lts, and stainless-steel electric heating elements of 6-7-8-10-12-14-15-16-18-20-22 kW, with a unique group of heating elements or two groups.
- INOX 60, boiler volume 55 lts, and stainless-steel electric heating elements of 20-24-30-36-40-50- 60 kW, with two groups of heating elements.
- INOX 60 COMBIÂ is composed by two overlapping INOX 60 boilers which can be used at the same time
- INOX 180, composed of three overlapping INOX 60 boilers that can be used at the same time
- Stainless steel tank for water feeding and condensate recovery
- all tank components in contact with water made in stainless steel.
Inox 60
Electric steam generators with ball-cock water level control. The electric steam generators of the INOX series, with the body of the boiler entirely made of STAINLESS STEEL AISI 304, are produced in accordance with the PED regulations. The steam generator can be fed directly by the water supply network or by a special steel tank.
The INOX series is available with boilers of different sizes and different power:
- INOX 16, boiler volume 16 lts, and stainless-steel electric heating elements of 7-8-10-12-15 Kw
- INOX 24, boiler volume 25 lts, and stainless-steel electric heating elements of 6-7-8-10-12-14-15-16-18-20-22 kW, with a unique group of heating elements or two groups.
- INOX 60, boiler volume 55 lts, and stainless-steel electric heating elements of 20-24-30-36-40-50- 60 kW, with two groups of heating elements.
- INOX 60 COMBIÂ is composed by two overlapping INOX 60 boilers which can be used at the same time
- INOX 180, composed of three overlapping INOX 60 boilers that can be used at the same time
- Stainless steel tank for water feeding and condensate recovery
- all tank components in contact with water made in stainless steel.
Inox 60 Combi
Electric steam generators with ball-cock water level control. The electric steam generators of the INOX series, with the body of the boiler entirely made of STAINLESS STEEL AISI 304, are produced in accordance with the PED regulations. The steam generator can be fed directly by the water supply network or by a special steel tank.
The INOX series is available with boilers of different sizes and different power:
- INOX 16, boiler volume 16 lts, and stainless-steel electric heating elements of 7-8-10-12-15 Kw
- INOX 24, boiler volume 25 lts, and stainless-steel electric heating elements of 6-7-8-10-12-14-15-16-18-20-22 kW, with a unique group of heating elements or two groups.
- INOX 60, boiler volume 55 lts, and stainless-steel electric heating elements of 20-24-30-36-40-50- 60 kW, with two groups of heating elements.
- INOX 60 COMBIÂ is composed by two overlapping INOX 60 boilers which can be used at the same time
- INOX 180, composed of three overlapping INOX 60 boilers that can be used at the same time
- Stainless steel tank for water feeding and condensate recovery
- all tank components in contact with water made in stainless steel.
